Equestrian Centre Roller Shutter Door Installation in Markfield

Project Overview

The brief in a sentence: A long-standing equestrian client needed a full roller shutter replacement at their main entrance, out with a failing set of folding doors, in with a heavy-duty commercial roller shutter that could keep up with a working yard.

The Challenge: Replacing Old Folding Doors

This client runs one of the busier equestrian centres in Markfield. On any given morning, horses are moving, feed wagons are turning in, and staff are pushing through that main entrance dozens of times before lunch. The doors need to work every time, without a fight.

The old folding doors had stopped doing that.

What the yard was dealing with:

• Constant misalignment: the doors required repeated adjustment and muscle just to pull across
• Dangerous side clearance requirements: folding doors need space to operate, which created a bottleneck in the main lane where horse boxes and trailers were trying to manoeuvre
• No weather resistance: gaps in the frame meant wind and driving rain were getting straight into the building, affecting bedding, feed, and equipment stored inside
• Rising maintenance costs: with no realistic end in sight

The folding doors had done their time. What the yard needed now was a replacement roller shutter door solution engineered for the demands of a working equestrian environment not a compromise.

Adams Industrial Doors insight: Folding agricultural doors are a magnet for dirt, rust, and mechanical failure. The floor tracks clog with mud, straw, and gravel, and once the alignment goes, it rarely sorts itself out. Upgrading to a vertical steel curtain doesn’t just modernise the building; it reclaims the lane space you didn’t realise you’d lost.

Our Roller Shutter Door Solution

Travis headed out to Markfield to conduct a thorough survey, measuring the structural opening, checking the brickwork and header condition, and getting a clear picture of how the entrance was used on a typical day.

Because Adams Industrial Doors had already worked across this yard on previous visits (more on that below), we knew the site. That context directly informed the specification.

What we installed:

• A bespoke heavy-duty commercial roller shutter manufactured in the UK by Priory Doors
• Steel curtain system with a high-torque electric tubular motor, smooth, single-switch operation
• Wired to a secure key switch with a manual override winder included as standard, so the door stays fully operational if power is interrupted
• Full UKCA-compliant cycle testing completed before the team left the site; no shortcuts, no sign-off until it was right

The vertical travel of the new shutter immediately solved the clearance problem. Horse boxes can pull right up to the line. Staff can operate it one-handed. It closes fully, keeping the weather outside where it belongs.

How was the job handled on-site?

With the old folding doors already removed ahead of the visit, Ash and Travis got straight to work measuring up to confirm everything was good to go before fitting the angles and moving into the main install.

• The precision fit of the new Priory Doors steel curtain system was engineered into the existing structural opening
• The compliance sign-off full cycle testing run before the tools were packed away

Because this wasn’t the team’s first visit to the site, the yard manager already knew what to expect. He’d popped by earlier in the day for a chat while the lads were on the tools, and once the shutter was up and tested, we did a quick walkthrough together to ensure he was 100% happy before the team headed off

Previous Installations at the Equestrian Centre

This roller shutter door installation in Markfield was not a first visit. Not even close.

Adams Industrial Doors has been working with this equestrian centre across multiple projects over several years. Previous work on the site includes:

• Supply and installation of multiple steel doorsets across ancillary buildings, storage areas and staff facilities, all fitted to BS PAS 24 standards
• Scheduled servicing on existing roller shutters already in place across the yard, keeping them compliant, safe, and audit-ready season after season

With over 20 years on the road, Travis and the team have worked through every technical challenge this industry has thrown their way. When this client needed a main entrance upgrade, there was only one call to make.

From first call to fitted: Jobs like this typically run 2–3 weeks from order. Travis gets out to site to measure up and quote on the same day, and once the client gives the nod, the order goes in. The team is back in touch around a week before the fit to confirm everything’s set, then it’s installation day.

Why Roller Shutters Are Ideal for Equestrian Centres

Working yards are hard on doors. Here’s why a steel curtain industrial roller shutter handles that environment better than any alternative:

• Security: A steel curtain shutter is a serious physical barrier. Once it’s down, it’s down. Timber panels and folding door leaves simply don’t compare when it comes to overnight security in a working yard.
• Weather protection: A correctly specified shutter seals the opening properly. Feed stays dry. Bedding stays dry. Heat stays in. A misaligned folding door does none of that.
• Ease of operation: One switch. Every time. Whether you’re carrying tack, a feed bucket, or a lead rope, electric operation removes the struggle entirely.
• Durability: Priory Doors’ steel curtain systems are engineered for high-frequency commercial use. Annual servicing is all they need to remain safe, compliant, and operating at full performance for years.
• Space-saving design: Vertical travel means zero floor clearance is lost. Horse boxes and trailers can get right up to the entrance. The lane stays open and safe.

From hay stores and tack rooms to wash bays, vehicle access points, and main entrances, equestrian centre roller shutter doors are one of the most practical, long-lasting upgrades a working yard can make. Our industrial door specialists install and service them regularly across Leicestershire and beyond.

What the client said:

“Thanks again, looks great… we will be in touch when we need some more!”

Looking for Roller Shutter Installation in Markfield or Leicestershire?

If your equestrian centre, commercial premises, or industrial building needs a replacement roller shutter door, whether you’re dealing with failing folding doors, worn manual shutters, or something that’s simply had its day, Adams Industrial Doors is ready to help.

We’re a family-run business with over 20 years of road engineering experience across Markfield, Leicestershire, and the wider East Midlands. No showroom. No middlemen. Just engineers who know their trade, turn up when they say they will, and don’t leave a site until the job is right.

Call us on 0330 111 4399 for a free, no-obligation quote. You can also explore our roller shutter installation service page or visit our Leicestershire location page to see the full area we cover. Free site visits, honest quotes, no call centres.